HP 316095-B21 - StorageWorks Edge Switch 2/24 릴리스 노트 - 페이지 5

{카테고리_이름} HP 316095-B21 - StorageWorks Edge Switch 2/24에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 페이지. Edge switch release notes
HP 316095-B21 - StorageWorks Edge Switch 2/24에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (9 페이지), 매뉴얼 (41 페이지), 매뉴얼 (40 페이지), 릴리스 노트 (32 페이지), 릴리스 노트 (27 페이지), 매뉴얼 (26 페이지), 릴리스 노트 (27 페이지), 릴리스 노트 (25 페이지), 설치 지침 매뉴얼 (24 페이지), 릴리스 노트 (23 페이지), 릴리스 노트 (23 페이지), 릴리스 노트 (22 페이지), 릴리스 노트 (23 페이지), 릴리스 노트 (19 페이지), 릴리스 노트 (19 페이지), 릴리스 노트 (18 페이지), 사용 설명서 (17 페이지), 릴리스 노트 (17 페이지), 업그레이드 지침 (16 페이지), 사용 설명서 (16 페이지), 설치 지침 매뉴얼 (16 페이지), 릴리스 노트 (16 페이지), 릴리스 노트 (17 페이지), 릴리스 노트 (11 페이지)

페이지 인쇄
HP 316095-B21 - StorageWorks Edge Switch 2/24 릴리스 노트

Operating systems

For a list of supported operating systems, see the HP StorageWorks SAN design reference guide,
available on the following HP website: http://www.hp.com/go/SANdesignguide.
Languages
English
Fixes
Table 2
lists issues that have been fixed in this release since the release of firmware version 09.03.00.
Table 3
lists issues that have been fixed in firmware version 09.03.00 since the release of firmware
version 09.00.00
Table 2 Fixes in this release
Description
After an initial program load (IPL), the optical transceiver
technical data is read from hardware and, if it was
invalid, the port was erroneously set to Inactive state due
to port speed conflict.
Multiple faults occurred after setting port's hosting node
port ID virtualization (NPIV) devices offline.
A domain/port zoning activation sometimes caused port
login (PLOGI) failure due to internal timing issue.
A switch sometimes responded to get entry for port type
(GE_PT) before routing tables were ready, due to fabric
rebuild.
When the Fabric View in HAFM Basic switch GUI was
opened and the fabric included an Mi10K, which does
not have an embedded GUI, a C0 fault was encountered.
In a FICON environment, the label file download failed
after upgrading from firmware 8.x to 9.x.
Using third party management via Open Systems
Management Server (OSMS), zone control operations
failed when a large zoneset was sent.
A memory leak caused a lockup after 32 pause frames
received from B-Series switch.
On rare occasions after upgrading to firmware 9.x, the
Ethernet port was not reset properly, causing loss of
manageability.
Receive buffer-buffer (RX BB) credits were being
inadvertently set to 0 (zero) after running online
diagnostics.
EFCM Basic product information did not always display
Element Manager as an installed feature.
Data collection sometimes caused a Control Processor
(CTP) processor fault.
FICON Allow/Prohibit matrix was lost after QPM was
installed.
Affected models
All
Director 2/64
Director 2/140
All
All
Director 2/140, 2/64
All
All
Director 2/140
All
M4700
Director 2/140
Director 2/140
Director and Edge Switch release notes
5