HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 참조 매뉴얼 - 페이지 25

{카테고리_이름} HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 48 페이지. Storageworks modular smart array controller, cache, and battery replacement instructions
HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter에 대해서도 마찬가지입니다: 관리 매뉴얼 (40 페이지), 릴리스 노트 (13 페이지), 빠른 시작 지침 (8 페이지), 릴리스 노트 (8 페이지), 릴리스 노트 (8 페이지), 빠른 시작 매뉴얼 (7 페이지), 릴리스 노트 (5 페이지), 교체 지침 (4 페이지)

페이지 인쇄
HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 참조 매뉴얼

Power Supply/Blower Assemblies

The MSA1000 includes redundant power supply/blower assemblies.
The power supplies share the electrical load equally. If either supply fails or is
removed, the other power supply assumes the full load without interruption.
Hot-pluggability allows you to replace the failed supply without shutting down the
MSA1000 storage system.
The blowers work together to maintain an acceptable operating temperature. If
one blower operates too slowly or completely shuts off, the other blower will
begin to operate at a higher speed.
Any changes in the performance level of the power supply or blower are reported
on the LCD panel of the associated controller. For a description of the possible
informational and error messages associated with the power supplies or blowers,
see the definitions for messages numbered 400 through 499 in the HP
StorageWorks 1000 Modular Smart Array Maintenance and Service Guide.
Depending on the setup of Insight Manager 7 and System Event Analyzer,
informational and error messages about the power supplies and blowers are also
reported though these software components.
Refer to the HP StorageWorks 1000 Modular Smart Array Maintenance and
Service Guide for more information.
HP StorageWorks 1000 Modular Smart Array Reference Guide
MSA1000 Hardware Components
25