HP 489183-B21 - InfiniBand DDR Switch 설치 매뉴얼 - 페이지 8
{카테고리_이름} HP 489183-B21 - InfiniBand DDR Switch에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 489183-B21 - InfiniBand DDR Switch 22 페이지. Hp blc 4x ddr infiniband gen 2 switch installation guide
HP 489183-B21 - InfiniBand DDR Switch에 대해서도 마찬가지입니다: 자주 묻는 질문 (4 페이지), 매뉴얼 사용 (15 페이지)
페이지 인쇄
For specific port connections for each server blade, see the HP BladeSystem Onboard Administrator
User Guide. Connections differ by server blade type. The information contained in this document
explains the cabling between the HP 4X DDR InfiniBand Gen 2 Switch and the network switches.
The HP Onboard Administrator screen example (see
Figure 1-2 HP Onboard Administrator Screen Example
You can install up to 16 InfiniBand cables in the uplink ports on HP 4X DDR InfiniBand Gen 2
Switch. An external subnet manager (not included in the HP 4X DDR InfiniBand Gen 2 Switch)
manages the topology for the InfiniBand fabric.
1.5 HP BLc 4X DDR InfiniBand Gen 2 Switch Connector Bays
Figure 1-3
shows the Quad Small Form-factor Pluggable (QSFP) connector bays on the front of
the HP BLc 4X DDR InfiniBand Gen 2 Switch.
Figure 1-3 HP BLc 4X DDR InfiniBand Gen 2 Switch Connector Bays
The following list describes the callouts in
1.
Uplink connectors, bays 1-4
2.
Uplink connectors, bays 5-8
3.
I²C port (inter-integrated circuit port)
4.
Uplink connectors, bays 9-12
5.
Uplink connectors, bays 13-16
8
Preparing for Installation
1
2
Figure
3
4
Figure
1-3:
1-2) is a reference for port mapping.
5