HP 5120-24G-PoE+ EI 구성 매뉴얼 - 페이지 22
{카테고리_이름} HP 5120-24G-PoE+ EI에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 5120-24G-PoE+ EI 39 페이지. Hp 5120 ei switch series
HP 5120-24G-PoE+ EI에 대해서도 마찬가지입니다: 데이터시트 (17 페이지)
페이지 인쇄
Remote login—Remotely log in at a Layer 3 interface on any member switch by using a methods
•
including Telnet, Web, and SNMP.
For more information, see the chapter on login in Fundamentals Configuration Guide.
Accessing the CLI of a subordinate switch
You can log in to the CLI of a subordinate switch for maintenance or debugging. At the CLI of a
subordinate switch, you are placed in user view, and the command prompt changes to
<Sysname-Slave#member-ID/slot-number>, for example, <Sysname-Slave#2>. You can use the
following commands at a subordinate switch's CLI:
•
display
quit
•
return
•
system-view
•
debugging
•
•
terminal debugging
terminal logging
•
terminal monitor
•
terminal trapping
•
Perform the following task in user view:
Task
Log in to a subordinate switch.
To return to the master's CLI, use the quit command.
Assigning an IRF domain ID to the IRF fabric
This task is required for running LACP MAD or ARP MAD between two IRF fabrics.
To assign a domain ID to an IRF fabric:
Step
1.
Enter system view.
2.
Assign a domain ID to the
IRF fabric.
Configuring a member switch description
You can configure a description to describe the location or purpose of a member switch for easy
management.
To configure a description for a member switch:
Command
irf switch-to member-id
Command
system-view
irf domain domain-id
18
Remarks
By default, you are placed at the
master's CLI.
Remarks
N/A
By default, the domain ID of an IRF fabric is 0.