AQUATECH RAPID/X6 설치 매뉴얼
{카테고리_이름} AQUATECH RAPID/X6에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUATECH RAPID/X6 2 페이지. Plumber's condensed
페이지 인쇄
RAPID/X6
PLUMBER'S CONDENSED
INSTALLATION GUIDE
Top profile
Structure
• This unit is designed for external operation only and requires a continuous supply of air to operate efficiently.
• Avoid installation in areas where falling debris, such as leaves, is prevalent as this may result in air vents being
blocked or the unit being damaged.
• Avoid placing the system in locations with multiple walls or structures.
• Always maintain optimum perimeter from all structures.
• The unit should be installed on a concrete plinth or stable structure capable of sustaining weights in excess of
315kg.
• A minimum dimension of 600mm x 600mm is required. Please ensure that all four feet are supported by the
base being used otherwise warranties may be voided.
• Unit is to be installed level to ensure condensation drainage is not impaired.
1. LOCATION SELECTION
150mm
fan exhaust
600mm
RAPID UNIT
150mm
2. BASE
SUPPLIED CONTENTS
CONDENSATE
DRAINAGE
ELBOW (connected)
OWNER'S
MANUAL
RAPID/X6
PTR
Side profile
300mm
600mm
pg.1