HP ProCurve J4863A 설치 매뉴얼 - 페이지 7
{카테고리_이름} HP ProCurve J4863A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP ProCurve J4863A 36 페이지. Switch gl modules
HP ProCurve J4863A에 대해서도 마찬가지입니다: 브로셔 (17 페이지), 설치 매뉴얼 (38 페이지)
페이지 인쇄
HP Procurve Switch
10/100-TX GL Module
(J4862B)*
HP Procurve Switch
100/1000-T GL Module
(J4863A)
HP Procurve Switch
Gigabit Transceiver
GL Module (J4864A)
†
Supported HP Procurve Transceivers (as of this printing):
• 100-FX Transceiver (J4853A)
• Gigabit-SX Transceiver (J4131A or J4131B)
• Gigabit-LX Transceiver (J4132A)
HP Procurve Switch
mini-GBIC GL Module
(J4893A)*
** Supported HP Procurve mini-GBICs (as of this printing):
• Gigabit-SX LC mini-GBIC (J4858A) • Gigabit-LX LC mini-GBIC (J4859A) • Gigabit-LH LC mini-GBIC (J4860A)
* These modules require switch software version G.05.02 or later to be installed in the switch.
HP Procurve Switch GL Modules
For the HP Procurve Series 4100GL Switches
Descriptions. The HP Procurve Switch GL Modules are components that you
can add to an HP Procurve GL switch to provide a variety of network connec
tivity options. The following modules are available as of this printing:
Module
Continued on the next page.
• 100/1000-T Transceiver (J4834A)
• Gigabit Stacking Transceiver (part of the HP Procurve Switch
Gigabit Stacking Kit -- J4116A)
Descriptions
Description
24 twisted-pair ports with RJ-45
connectors for 10 Mbps or 100
Mbps operation over 100-ohm
unshielded (UTP) or shielded (STP)
twisted-pair cable -- all ports have
the HP Auto-MDIX feature.
6 twisted-pair ports with RJ-45
connectors for 1000 Mbps
(Gigabit) or 100 Mbps operation
over Category 5 or better 100-ohm
UTP or STP cable (category 5E
recommended for Gigabit) -- all
ports have the IEEE 802.3ab Auto
MDI/MDI-X feature.
3 transceiver slots for installing
any of the supported HP Procurve
†
Transceivers
.
6 mini-GBIC slots for installing any
of the supported HP Procurve
mini-GBICs**.
1