HP ProCurve Series 설치 매뉴얼 - 페이지 10

{카테고리_이름} HP ProCurve Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP ProCurve Series 18 페이지. High-speed transceivers
HP ProCurve Series에 대해서도 마찬가지입니다: 먼저 읽기 (8 페이지)

페이지 인쇄

xcvrs_3-2002.fm Page 7 Tuesday, April 2, 2002 3:23 PM

To connect a fiber-optic cable to

a transceiver:

1. For fiber-optic transceivers,

remove the plastic dust covers

from the cable connectors and

from the transceiver port.

2. Press the connector into the jack

so that the tabs on the connector

slide into the notches in the jack

and the connector snaps securely

into place.

3. If you are using cable with SC duplex connectors, as shown in the

illustration, both cables are connected simultaneously. If the cable has

simplex connectors, install them one at a time and make sure that the

cable connected into the Tx (transmit) port on the transceiver is

connected into the receive port on the device at the other end of the

cable; similarly, make sure the Rx (receive) port on the transceiver is

connected to the transmit port on the other device.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

notches

Fiber cable

with duplex SC

connector