HP ProCurve Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} HP ProCurve Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP ProCurve Series 18 페이지. High-speed transceivers
HP ProCurve Series에 대해서도 마찬가지입니다: 먼저 읽기 (8 페이지)

HP ProCurve Series 설치 매뉴얼
xcvrs_3-2002.fm Page 2 Tuesday, April 2, 2002 3:23 PM

Installation Notes

Please read these notes before proceeding.
The HP Procurve High-Speed Transceivers are supported in the
following HP Procurve networking devices:
• Series 2300 and 2500 Switches
• Series 4100GL Switches
For these switches, it is not necessary to turn off power to the
device before installing the transceiver into it:
• For the Series 2300 and 2500 switches, you can install the
transceivers while the switches are powered on, but you must
reset or reboot the switch after installing the transceiver to
initialize and activate it.
• For the Series 4100GL switches, the transceivers are installed in
the Gigabit Transceiver GL Module. In these switches, the trans-
ceivers are fully "hot swappable"—you can install or remove
them at any time without having to remove power from the
device or without having to first remove the module from the
switch, and without having to reset the switch. If you wish, you
can install the transceiver into the module first before installing
the module into the switch.
Please see the installation guide for the switch or module for more
information on installing the transceivers.
Note: As of the printing of this manual, the HP Procurve Switch
2424M (J4093A) and its transceiver module, the HP Procurve
Switch 2424M Gigabit Stacking Module (J4130A) are obsolete.
As a result, the Gigabit-SX Transceiver, J4131B, has not been tested
in these devices and is therefore not supported. The other trans-
ceivers described in this manual were previously tested and are
supported in the Switch 2424M and its Gigabit Stacking Module.
For information on using transceivers in the HP Procurve Switch
2424M and the Gigabit Stacking Module, see their manuals on the
HP Procurve web site, http://www.hp.com/go/hpprocurve.
2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com