HP ProCurve Switch 2650-PWR 매뉴얼 보충 자료 - 페이지 16

{카테고리_이름} HP ProCurve Switch 2650-PWR에 대한 매뉴얼 보충 자료을 온라인으로 검색하거나 PDF를 다운로드하세요. HP ProCurve Switch 2650-PWR 22 페이지. Power over ethernet (poe) operation
HP ProCurve Switch 2650-PWR에 대해서도 마찬가지입니다: 데이터시트 (9 페이지)

페이지 인쇄

Planning and Implementing a PoE Configuration

For example, if you wanted to view the PoE status of port 5 on a Switch 2626-

PWR or Switch 2650-PWR, you would use show power-management 5 to display

the data:

Figure 3. Example of Show Power-Management < port-list > Output

Planning and Implementing a PoE

Configuration

This section provides an overview of some considerations for planning a PoE

application. For additional information on this topic, refer to the HP ProCurve

Switch 2600-PWR Series Planning and Implementation Guide.

Assigning PoE Ports to VLANs

If your network includes VLANs, you may want to assign various PoE-config

ured ports to specific VLANs. For example, if you are using PoE telephones

in your network, you may want to assign ports used for telephone access to a

VLAN reserved for telephone traffic.

Applying Security Features to PoE Configurations

You can utilize security features built into the switch to control device or user

access to the network through PoE ports in the same way as non-PoE ports.