HP ProLiant DL380 G4 DPSS 설치 매뉴얼 - 페이지 34

{카테고리_이름} HP ProLiant DL380 G4 DPSS에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP ProLiant DL380 G4 DPSS 48 페이지. Generation 4 (g4) packaged cluster with modular smart array 1000
HP ProLiant DL380 G4 DPSS에 대해서도 마찬가지입니다: 구현 매뉴얼 (35 페이지), 릴리스 정보 (21 페이지), 릴리스 정보 (8 페이지), 설치 지침 (2 페이지), 백서 (13 페이지), 구현 매뉴얼 (9 페이지), 통합 참고 사항 (26 페이지), 빠른 사양 (48 페이지), 빠른 사양 (42 페이지)

페이지 인쇄
HP ProLiant DL380 G4 DPSS 설치 매뉴얼
7.
On the Internet Options dialog box, click OK to finish.
To connect the storage server to a network using the remote browser
method
1.
On the remote client machine open Internet Explorer and
enter https:// and the serial number of the storage server
followed by a hyphen (-), and then:3202. For example,
https://D4059ABC3433-:3202 Press Enter.
NOTE:
You can substitute the IP address for the serial number, if
you are connected through DHCP.
2.
Click OK on the Security Alert prompt.
3.
Log in to the HP ProLiant Storage Server Management console with the
default user name administrator and the password hpinvent.
NOTE:
You can change the administrator name and password
when you configure the server using the
Wizard" on page 42.
4.
To complete network configuration using the Rapid Startup Wizard,
see
"Configuring the server on the
IMPORTANT:
If you are using the remote browser method to access the HP Storage
Server Management console and Rapid Startup Wizard, always close
the remote session before closing your Internet browser. Closing the
Internet browser does not close the remote session. Failure to close your
remote session impacts the limited number of remote sessions allowed on
the storage server at any given time.

Using the Remote desktop method

To connect the storage server to a network using the remote desktop
method
1.
On the PC client, select Start > Run. At Open, type mstsc, then click
OK.
34
Accessing the HP Storage Server Management console
"Rapid Startup
network" on page 39.