HP StorageWorks 1500cs - Modular Smart Array 교체 지침 - 페이지 2

{카테고리_이름} HP StorageWorks 1500cs - Modular Smart Array에 대한 교체 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 1500cs - Modular Smart Array 2 페이지. Storageworks modular smart array
HP StorageWorks 1500cs - Modular Smart Array에 대해서도 마찬가지입니다: 관리 매뉴얼 (40 페이지), 릴리스 노트 (13 페이지), 빠른 시작 매뉴얼 (7 페이지), 릴리스 노트 (5 페이지), 교체 지침 (4 페이지), 교체 지침 (5 페이지), 매뉴얼 (16 페이지), 설치 (4 페이지)

페이지 인쇄
HP StorageWorks 1500cs - Modular Smart Array 교체 지침
Step 1: Removing the module
Note:
Before removing the SCSI I/O module, label all cables. This
ensures their reconnection in the correct configuration.
1. Disconnect all SCSI cables from the SCSI I/O module.
2. Lift the port-colored SCSI I/O module latch 1 and pull the
SCSI I/O module out of the enclosure 2.
Figure 2: Removing the SCSI I/O module
Step 2: Installing the module
To install a SCSI I/O module:
1. Slide the SCSI I/O module into the bay until it clicks into
place.
Figure 3: Installing the SCSI I/O module
2. Reconnect all SCSI cables.
Note:
Make sure that all of the SCSI connectors are fastened tightly.
Verifying the replacement
After replacing the failed SCSI I/O module, verify that:
No error messages are displayed on the controller LCD.
The status LED is solid green.Returning the failed
component.
2
1
Returning the failed component
Please follow the return instructions provided in the
replacement component package.
Additional information
For additional information, refer to the MSA technical
documents web site at http://www.hp.com/go/msa1500cs.