HP StorageWorks 2/32 - SAN Switch 릴리스 노트 - 페이지 42
{카테고리_이름} HP StorageWorks 2/32 - SAN Switch에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 2/32 - SAN Switch 48 페이지. Fabric manager version 3.0.x release notes
HP StorageWorks 2/32 - SAN Switch에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (20 페이지), 사용자 설명서 (22 페이지), 펌웨어 릴리스 노트 (14 페이지), 설치 지침 매뉴얼 (6 페이지), 릴리스 노트 (32 페이지), 릴리스 노트 (14 페이지), 릴리스 노트 (4 페이지)
페이지 인쇄
Table 8
Fabric OS 4.4.0d closed issues summary
Closed defect
Issue: During firmware upgrade
from FOS4.0.2x to FOS 4.4.0x,
zone configuration is lost if switch
is rebooted without any prior zone
changes
Symptom: During the upgrade from
internal FOS v4.0.2 to v4.4.0x,
there is a loss of zoning
configuration. Even though
cfgshow is empty, it will not
merge after
portdisable/enable. When
workaround by using
configdownload with a saved
configuration file created prior to
FOS 4.4.0, configdownload fails
with vcEncoded mode not
supported on FOS4.4.0x.
Issue: The RPA and RPRT is not
forwarded to FOS5.0 and later
versions
Symptom: When local domain
HBA/port information changes, the
information is not propagated to
domains running FOS5.0 or
higher.
Issue: Cannot create DCC_POLICY
by using * to include port numbers
greater than 127 in the
DCC_POLICY.
Symptom: secpolicycreate
"DCC_POLICY", "domainid(*)" on
a platform with more than 128
port, fails with VERIFY - Failed
expression: strlen(mbrBuf) > 0
Issue: ConnUnitPortFCid MIB
changed format in FOS 4.4.0x
Symptom: Output from early FOS
was in byte data format. This was
changed to asci data for
FOS4.4.0x which caused
applications relying on the old
format to break.
42
Closed issues from Fabric OS 4.4.0d
Status
Fixed
Fixed
Fixed
Fixed