HP StorageWorks 2/64 - Core Switch 릴리스 노트 - 페이지 5
{카테고리_이름} HP StorageWorks 2/64 - Core Switch에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 2/64 - Core Switch 48 페이지. Master glossary
HP StorageWorks 2/64 - Core Switch에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (9 페이지), 매뉴얼 (32 페이지)
페이지 인쇄Supported switches
Fabric OS v4.4.0f supports the following switches:
•
HP StorageWorks SAN Switch 2/8V
•
HP StorageWorks SAN Switch 2/16V
•
HP StorageWorks SAN Switch 2/16N
•
HP StorageWorks SAN Switch 2/32
•
HP StorageWorks Core Switch 2/64
•
HP StorageWorks SAN Director 2/128
•
HP StorageWorks SAN Switch 4/32
Technical support
Contact Hewlett-Packard support for hardware, firmware, and software support, including product
repairs and part ordering. To assist your support representative and to expedite your call, have the
following information available:
•
Technical support contact number, if available
•
Switch model
•
Switch operating system version
•
Error messages received
•
Output from supportshow command
•
Detailed problem description and specific questions
•
Description of any troubleshooting steps already performed and results
Switch Serial Number
The serial number label location varies with switch model, as follows:
•
For the SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/16N and SAN Switch 2/32
models, the label is on the rear chassis panel.
•
For the SAN Switch 4/32, the label is on the switch ID pull-out tab located on the port side, and
on the inside of the chassis, near the Power Supply 1.
•
For the Core Switch 2/64 and SAN Director 2/128, the label is on the inside front of the
chassis, on the wall to left of the ports.
Fabric OS 4.4.0f release notes
5