HP StorageWorks 7110 - Virtual Array 지침

{카테고리_이름} HP StorageWorks 7110 - Virtual Array에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 7110 - Virtual Array 4 페이지. Private loop (hubs/direct connect)
HP StorageWorks 7110 - Virtual Array에 대해서도 마찬가지입니다: 매뉴얼 사용 (34 페이지), 업그레이드 지침 (12 페이지), 매뉴얼 (4 페이지), 매뉴얼 (4 페이지), 설치 지침 (2 페이지), 매뉴얼 (2 페이지), 매뉴얼 (1 페이지), 매뉴얼 (1 페이지)

페이지 인쇄
HP StorageWorks 7110 - Virtual Array 지침
Instructions for the HP SureStore VA7100
Deskside Assembly Conversion Kit
NOTE: Install the HP SureStore Virtual Array 7100 into the Deskside Assembly before installing the
disk drives and power modules, cabling it up, connecting the array to power, and connecting to the host.
For more information, see the Quick Start Guide (customer order part no. A6183-90901).
NOTE: If you are converting a field-rackable unit that is already racked, please see the Quick Start Guide.
(To uninstall, reverse the rack installation instructions given in the Quick Start Guide.)
1.
Check the following conversion kit contents
(Figure 1). If any parts are missing, call your
nearest HP sales office.
Deskside Conversion Kit:
•
Quick Start Guide (A6183-90901)
•
Installation Guide (A6196-96001)
•
Deskside Assembly (A6196-60001)
-
Cover
-
End-cap
-
Base
•
Hardware Kit (A6196-60002)
-
10 x M5 Screws
Tools required:
•
Torx T10 driver
•
Torx T25 driver
2.
Follow the instructions provided in the Quick Start
Guide to unpack and disassemble the array.
Be sure to remove the drives and the power modules from the array chassis before installing
WARNING!
the array chassis in the deskside assembly. D
To avoid damage to the modules and possible injury to the persons installing the deskside assembly,
the array chassis must be empty of everything except the controllers before converting to a deskside
configuration.
Figure 1
N
O
OT REMOVE THE CONTROLLERS
Quick Start Guide
Installation Guide
10 x M5 Screws
Deskside Assembly
.
1