HP StorageWorks 8/80 - SAN Switch 릴리스 노트 - 페이지 4
{카테고리_이름} HP StorageWorks 8/80 - SAN Switch에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 8/80 - SAN Switch 29 페이지. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
HP StorageWorks 8/80 - SAN Switch에 대해서도 마찬가지입니다: 릴리스 노트 (30 페이지), 릴리스 노트 (43 페이지), 릴리스 노트 (32 페이지)
페이지 인쇄
Update recommendations
NOTE:
With the introduction of Fabric OS 6.1.1, certain features/functions were removed from Web Tools
(resident in the firmware) and migrated into the Data Center Fabric Manager (DCFM) management
application. It is therefore recommended that before you upgrade to 6.1.1x or later, if DCFM is not
running on your fabric, you review the
notes and take note of what has changed, so you can assess the impact to your particular fabric
All products supported by Fabric OS 6.0.x can be upgraded to Fabric OS 6.1.1b. If applicable, HP
recommends that users upgrade to Fabric OS 6.1.1b as soon as possible to take advantage of the
latest fixes and features.
Upgrading to Fabric OS 6.1.1b is allowed only from Fabric OS 6.0.0b and later. This policy to
support only one-level migration, which began with Fabric OS 6.0.0, provides more reliable and
robust migrations for customers. With fewer major changes in internal databases, configurations, and
subsystems, the system can perform the upgrade more efficiently, taking less time and ensuring a truly
seamless and non-disruptive process for the fabric. The new one-level migration policy also reduces
the large number of upgrade/downgrade permutations that must be tested.
Only products based on 4-Gb and 8-Gb-capable ASICs are supported by Fabric OS 6.1.1b. Older
products using previous generation 2-Gb ASICs will remain on the 5.x code stream. Fabric OS 5.x
is fully compatible in fabrics running Fabric OS 6.1.x, and for routing.
For routed SANs with M-EOS switches in an edge fabric, upgrades to Fabric OS v6.1.1b will be
non-disruptive if all EX_Ports to M-EOS edge fabrics are attached to 4/256 SAN Directors with an
MP router blade (FR4–18i).
Supersedes
Fabric OS 6.1.0f released in November, 2008.
New hardware support
The HP StorageWorks 4/256 Director running Fabric OS 6.1.0a or later now supports the following
Director blades:
•
HP StorageWorks SAN Director 32 Port 8-Gb FC blade (Brocade FC8-32)
•
HP StorageWorks SAN Director 48 Port 8-Gb FC blade (Brocade FC8-48)
NOTE:
The HP StorageWorks SAN Director 16 Port 8-Gb FC blade (FC8-16) is supported with the 4/256,
starting with Fabric OS 6.0.0b.
Supported product models
The following product models can be upgraded to Fabric OS 6.1.x or later:
4
Web tools functionality moved to DCFM
section in these release