HP StorageWorks 8B - FC Entry Switch 사용자 설명서 - 페이지 22

{카테고리_이름} HP StorageWorks 8B - FC Entry Switch에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 8B - FC Entry Switch 38 페이지. Fabric os release notes version 3.0.1b
HP StorageWorks 8B - FC Entry Switch에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (9 페이지), 설치 지침 매뉴얼 (20 페이지), 사용자 설명서 (22 페이지), 펌웨어 릴리스 노트 (14 페이지), 설치 매뉴얼 (14 페이지), 릴리스 노트 (26 페이지), 매뉴얼 (50 페이지), 사용자 설명서 (44 페이지), 사용자 설명서 (44 페이지), 사용자 설명서 (38 페이지), 사용자 설명서 (37 페이지), 사용자 설명서 (30 페이지), 릴리스 노트 (16 페이지)

Using Fabric Watch

Threshold Area Values

Threshold area values include boundaries and alarms, and apply to all the thresholds within an area.

Changes are stored in the configuration file.

Boundaries

The following boundary information can be modified:

Unit string

Time base

Low boundary

High boundary

Buffer size

Alarms

The following alarms can be added or deleted:

ERRLOG

SNMP-TRAP

PORT-LOG-LOCK

Email Alert

2-10

Represents unit value. Only the default unit strings are supported by

Fabric Watch.

Time period within which a specified event is measured. Can be

from one second to one day. Shorter time periods are more sensitive

to fluctuations and therefore will provide more detailed

information.

Note:

The Time base boundary can only be modified through a

telnet command. The Time base bounder does not apply to

the:

- Transmit performance area

- Receive performance area

- Filter class

Minimum value. An event is generated if the element value falls

below this boundary.

Maximum value. An event is generated if the element value rises

above this boundary.

Size of buffer set up to decrease generation of in-between events

due to oscillation of the element value over a boundary.

Logs errors to switch. If configured properly, sends message to

syslog on daemon.

Sends trap to SNMP agent.

Freezes port log to preserve log information generated at time of

event, for diagnostic purposes.

Sends alarm messages to the corresponding mail address.

Fabric Watch User's Guide