HP StorageWorks 9100 - Extreme Data Storage System 지침
{카테고리_이름} HP StorageWorks 9100 - Extreme Data Storage System에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 9100 - Extreme Data Storage System 4 페이지. Hp storageworks 3gb sas bl switch installation instructions (496788-002, march 2009)
HP StorageWorks 9100 - Extreme Data Storage System에 대해서도 마찬가지입니다: 사용자 설명서 (50 페이지), 설치 지침 (3 페이지)
페이지 인쇄
HP StorageWorks
3Gb SAS BL Switch replacement
instructions
This document details the procedures for replacing a
failed 3Gb SAS BL Switch in a c-Class enclosure.
© Copyright 2008, 2009 Hewlett-Packard Development Company,
L.P.
Second edition: March 2009
The information in this document is subject to change without notice.
Printed in US
www.hp.com
*496787-002*
About this document
For the latest documentation, go to
manuals, and select your product.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
WARRANTY STATEMENT: To obtain a copy of the warranty for this
product, see the warranty information website:
go/storagewarranty
Before you begin
Observe the following:
CAUTION:
•
Removing a module significantly changes air flow within the
enclosure. All enclosure bays must be populated with a module
or blanking panel for the enclosure to cool properly. If a
module fails, leave it in place in the enclosure until a new
module is available to install.
•
Parts can be damaged by electrostatic discharge. Use proper
anti-static protection. Refer to the documentation that shipped
with your system for additional information.
IMPORTANT:
In a single-switch deployment, obtain records of the switch
configuration, zone groups, and assignments. After replacing
the switch, all settings must be re-entered.
NOTE:
Illustrations in this document may show a c-Class enclosure or
blade devices that differ from your deployment. However,
replacement procedures are the same for all enclosures that
use this switch.
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
Page 1
http://www.hp.com/support/
http://www.hp.com/