HP StorageWorks C-Series 호환성 매뉴얼 - 페이지 22
{카테고리_이름} HP StorageWorks C-Series에 대한 호환성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks C-Series 25 페이지. Fabric interoperability: merging fabrics based on c-series and b-series fibre channel switches application notes
페이지 인쇄Table 6 HP p-Class BladeSystem support
HP p-Class
BladeSystem
BL20p
BL60p
Table 7 HP c-Class BladeSystem support
HP c-Class
BladeSystem
BL460c
BL465c
BL480c
Troubleshooting
This section provides basic troubleshooting tips.
1.
If you see segmentation errors on any of the switches after merging the fabrics, verify that
interoperability mode is enabled on all switches in the fabric.
2.
Ensure that all the time out values are set properly, especially E_D_TOV (2 seconds) and R_A_TOV
(10 seconds).
3.
If you see segmentation errors and messages such as Platform Management Database
Inconsistency on B-series switches, disable the management server on B-series switches using
the msPlMgmtDeactivate Telnet command, as described in these application notes.
4.
If you notice any zoning related issues, verify that there were no duplicate zone sets or zones
before merging. Also ensure all zones are configured using port WWN only.
Related information
Documents:
•
HP StorageWorks SAN design reference guide
22
Fibre Channel
Operating system
Microsoft Windows
2003
Windows 2000
QLogic ISP2312
Red Hat Enterprise
based dual port
Linux 3 and 4 (X86)
Fibre Channel card
SLES 8 (X86)
SLES 9 (X86)
QLogic ISP2312
HP-UX 11i
Fibre Channel ports
(2 Gb/s)
Fibre Channel
Operating system
Microsoft Windows
2003
Windows 2000
Emulex LPe1105
Red Hat Enterprise
QLogic QMH2462
Linux 3 and 4 (X86)
SLES 8 (X86)
SLES 9 (X86)
nl
interface
Embedded switch
Brocade 4 Gb SAN
switch for HP p-
Class BladeSystem
nl
interface
Embedded switch
Brocade 4 Gb SAN
switch for HP
c-Class BladeSystem
(Switch Mode or
AG Mode)
Cisco MDS 9124e
Fabric Switch for HP
c-Class BladeSystem
(Switch Mode or
NPV Mode)
Storage systems
XP
EVA
Storage systems
XP
EVA
MSA