HP StorageWorks Core Switch 2/64 릴리스 노트 - 페이지 8

{카테고리_이름} HP StorageWorks Core Switch 2/64에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks Core Switch 2/64 20 페이지. Director power cord advisory instruction
HP StorageWorks Core Switch 2/64에 대해서도 마찬가지입니다: 빠른 사양 (13 페이지), 릴리스 노트 (27 페이지), 릴리스 노트 (24 페이지), 릴리스 노트 (13 페이지), 릴리스 노트 (11 페이지), 지침 (1 페이지)

페이지 인쇄

Supported Configurations

Operation of multiple switches in a fabric topology is subject to the following

topology limits. Consider the impact of these limits when planning the fabric.

Note:

High Availability Planning Guide

Note:

path, not the total number of ISL connections between devices.

For more information about planning the fabric, refer to

Fabric Elements – Each fabric element is defined by a unique domain ID that

ranges between 1 and 31; therefore, the theoretical limit of interconnected

directors in a single fabric is 31. The supported limit of interconnected

switches in a single fabric is 24. Because this number is subject to change,

contact your HP authorized service representative for the current number of

interconnected switches supported in a single fabric.

Inhomogeneous fabric – To determine if interoperability is supported for a

product, or if restrictions apply, refer to the product publications, or contact

your HP authorized service representative.

Number of Interswitch Links (ISLs) – Theoretically, the ISL limit per

Director 2/64 is 48 and for Director 2/140 is 70. The maximum supported

number of ISLs is 75% of installed ports for the director 2/64, and 50% of

installed ports for the director 2/140. For redundancy, at least two ISLs should

connect any two director-class fabric elements. Because this number is subject

to change, contact your HP authorized service representative for the current

number of ISLs supported per director.

Hop Count – The Fibre Channel theoretical limit of ISL connections

traversed (hop count) in a single path through a fabric is 7. The maximum

supported hop count in a single path through a fabric is 3. Because this

number is subject to change, contact your HP authorized service

representative for the current hop count supported by a single fabric path.

The hop count is equal to the number of ISL connections traversed in a single

HP StorageWorks SAN

Director Release Notes