HP StorageWorks director 2/140 설치 지침 매뉴얼 - 페이지 21
{카테고리_이름} HP StorageWorks director 2/140에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks director 2/140 24 페이지. Universal port module kit
HP StorageWorks director 2/140에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (22 페이지)
페이지 인쇄
Figure 8: Port Diagnostics dialog box
9. Select a port or UPM card for test, perform one of the following:
— To select an individual port for test, type the port number in the Port Number
field.
— To select a UPM card for test, type the port number of any of the four ports an
the card in the Port Number field, then choose All Ports On Card.
10. At the Diagnostics Test list box, choose External Loopback.
11. Click Next. Beaconing initiates for the port or UPM card selected for test.
At the Hardware View, a yellow triangle displays at the top of the UPM card. At
the Port Diagnostics dialog box, the following message displays:
Loopback plug(s) must be installed on ports being diagnosed.
universal port module kit installation instructions
Installation Instructions
13