HP StorageWorks SAN Switch 2/8 Power Pak 릴리스 노트 - 페이지 16
{카테고리_이름} HP StorageWorks SAN Switch 2/8 Power Pak에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks SAN Switch 2/8 Power Pak 26 페이지. San switch 2/8 version 3.0.2k release notes
HP StorageWorks SAN Switch 2/8 Power Pak에 대해서도 마찬가지입니다: 릴리스 노트 (16 페이지)
페이지 인쇄
Management Station Requirements for Running Web Tools
Note:
Fabric license is installed, the fabric identifies the switch as a 2/8 EL with a Full Fabric
license, providing full fabric functionality.
■
Management Station Requirements for Running Web Tools
The workstation used to manage a fabric and configure a switch must meet the
following requirements in order to install and run Web Tools. Web Tools is
installed and runs on the switch, but is displayed in a Web browser running on
the workstation.
Operating Systems
One of the following operating systems must be installed:
■
■
■
■
Memory Requirement (Windows Operating Systems)
The minimum installed RAM memory requirements are listed next. Generally,
managing more switches means a larger memory requirement.
Number of Switches
16
Complete installation instructions are provided with each license. After the Full
In fabrics which contain five or more switches, with at least one switch
with the IV_FABRIC license installed, reduce the number of switches to four
or less.
HP-UX (For the latest supported configuration, please refer to the HP
StorageWorks SAN Product Support Tables for the SAN Design Reference
Guide, part number AV-RNZEM-TE available at:
http://h18000.www1.hp.com/products/storageworks/san/documentation.html
Solaris 2.61 or later
Windows 95, 98, or 2000
Windows NT 4.0
1–4
5–9
10–20
21 or more
Minimum Memory Requirement
64 MB
96 MB
128 MB
256 MB
SAN Switch 2/8 Version 3.1.x Release Notes