HP StorageWorks SAN Switch 2/8 Power Pak 릴리스 노트 - 페이지 20
{카테고리_이름} HP StorageWorks SAN Switch 2/8 Power Pak에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks SAN Switch 2/8 Power Pak 26 페이지. San switch 2/8 version 3.0.2k release notes
HP StorageWorks SAN Switch 2/8 Power Pak에 대해서도 마찬가지입니다: 릴리스 노트 (16 페이지)
페이지 인쇄
Issues and Workarounds
This issue has been identified and confirmed by Microsoft. For details, see
the URL:
http://support.microsoft.com/default.aspx?scid=KB;en-us;242167&.
There are two workarounds for this issue:
■
■
Alternatively, it is possible that you can obtain a workaround directly from
Microsoft for this problem. Please contact Microsoft support and supply them the
information in the defect as described in the URL:
http://support.microsoft.com/default.aspx?scid=KB;en-us;242167&.
Other Issues
This section describes some additional minor issues that you might encounter and
provides methods for working around those issues where appropriate.
LTO 2 Tape Drive Support
When using the LTO 2 Tape Drive, the user must perform the following command
on both Fabric OS 3.x and 4.x:
switch> portcfggport port# (port into which the drive is plugged).
Performing this command allows the tape drive to function in Point to Point mode
rather than in Loop mode.
PKICERT Utility
Before using the PKICERT utility to prepare a Certificate Signing Request (CSR),
please ensure that there are no spaces in the switch names of any switches in the
fabric. The website that processes the CSRs and generates the digital certificates
does not accept switch names containing spaces, and any CSRs that do not
conform to this requirement will be rejected.
Telnet passwsd Command
Using the Telnet passwd command in Secure mode to change the password
results in all sessions using that password to be logged out, including the session
that changed the session.
This logging out is expected behavior. The session terminates if you change the
password in Secure mode.
20
Always use a single instance of the SwitchExplorer on NT/4.0 and IE 5.0/5.5
Update your Internet Explorer software to IE 6.0 SP1
SAN Switch 2/8 Version 3.1.x Release Notes