HP StorageWorks SN6000 빠른 시작 설치 지침
{카테고리_이름} HP StorageWorks SN6000에 대한 빠른 시작 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks SN6000 2 페이지. Fibre channel switch xpak stacking cable
HP StorageWorks SN6000에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (9 페이지), 설치 지침 (4 페이지), 빠른 시작 설치 지침 (2 페이지)
페이지 인쇄
HP SN6000
Fibre Channel Switch
Power Supply Quick Start
Installation Instructions
© Copyright 201 1 Hewlett-Packard Development Company, L.P.
Printed in the U.S.
HP Part Number: 5697- 1 309
Published: November 201 1
Edition: 2
*5697-1309*
Page 1
Overview
Congratulations on your purchase of the HP SN6000
Fibre Channel Switch power supply. This document
provides procedures for replacing SN6000 Fibre
Channel Switch power supply models SBPSFANBF,
SBPSFANFB, SBPSFAN2BF, and SBPSFAN2F. These
instructions are also available in the HP SN6000
Fibre Channel Switch Installation and Reference
Guide.
Supported switches
This power supply is for the HP SN6000 Dual Power
Supply Fibre Channel Switch.
Related documentation
For the latest documentation for the HP SN6000 Fibre
Channel Switch, see the HP website
http://www.hp.com/go/sn6000.
Before you begin
CAUTION:
•
Both power supplies must have the same
air flow direction to prevent the switch
from overheating.
•
To avoid overheating, do not operate the
switch with one power supply any longer
than necessary.
•
This is a Class A product. In a domestic
environment, this product may cause
radio interference, in which case, the user
may be required to take adequate
measures.
Collect the required items
Required tools:
•
Cross-head screwdriver, medium