HP surestore fc 1Gb entry switch 8B 매뉴얼 - 페이지 11
{카테고리_이름} HP surestore fc 1Gb entry switch 8B에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP surestore fc 1Gb entry switch 8B 50 페이지. Fabric os procedures guide (version 3.0)
페이지 인쇄Setting the Initial Configuration
This chapter provides information on initial configuration tasks for a switch.
Logging into a Switch
To log into a switch:
1.
Open a telnet connection to the switch. The login prompt is displayed if the telnet connection
successfully found the switch in the network.
Note:
2.
At the login prompt enter the user ID you are logging in as. For example:
login: admin
The password prompt is displayed if the user exists.
3.
Enter the password for the user:
password: xxxxxx
The default password is password.
4.
If the login was successful a prompt is displayed showing the switch name and user ID you are
logged in as. For example:
switch55>admin:
Fabric OS Procedures Guide
The switch must be connected to your IP network through the RS-232 port to enable
connection through telnet. Refer to the hardware manual of your switch for more
information about connecting the switch to your IP network.
Chapter
1
1-1