aQuatell Fleck 5600SXT 사용 설명서 - 페이지 15

{카테고리_이름} aQuatell Fleck 5600SXT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. aQuatell Fleck 5600SXT 15 페이지.

23. You will see "BW" in the top right hand corner and will have numbers counting down. You

should also have water exiting the drain line of the softener. Inspect the drain line connector

at the valve for leaks and also make sure that the receptacle into which the drain is running, is

able to handle the flow. You do not need to let this cycle run to completion. Once you've

inspected the components, press the NEXT CYCLE button again to advance to the next

stage.

24. You will see "BD" in the top right hand corner and will have numbers counting down. Open

the brine tank and listen - you should hear air being sucked into the softener through the

brine line. Press the NEXT CYCLE button again.

25. You will see "RR" in the top right hand corner and will have numbers counting down. Press

the NEXT CYCLE button again.

26. You will see "BF" in the top right hand corner and will have numbers counting down. Allow

this stage to run for it's full duration. While this stage is running check the brine line adapter

on the softener valve for any leaks. You'll also want to have a look inside the brine tank to

make sure it's filling with water. Also watch to make sure that the safety float in the brine

tank does not stop the flow of water before the time has run down for this stage.

27. You can now add a few bags of salt to your brine tank. Your water softener installation is

now complete. Enjoy your luxurious softened water!

Page 15

Fleck 5600SXT U.S. V1.1