Panasonic WV-CW364S 사용 설명서 - 페이지 25

{카테고리_이름} Panasonic WV-CW364S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-CW364S 36 페이지. Vandal resistant fixed dome camera
Panasonic WV-CW364S에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

Note:

• When the zoom lock knob is adjusted to

the WIDE side and the tilt angle is approx.

±75 °, 1/3 part of the screen may be hid-

den.

Important

• Tighten the panning table lock screw and

tilting lock screw. (Recommended tighten-

ing torque: 0.59 N·m {0.44 lbf·ft})

e Rotate the azimuth adjuster to adjust the

azimuth angle of the image (Range:

±100°).

Rotating angle:

–100 °

Indication

Zoom and focus adjustment

At the same time as adjusting the pan and

tilt(Step 2), adjust the zoom and focus.

NEAR

WIDE

This illustration represents WV-CW364S.

Azimuth adjuster

Rotating angle:

+100 °

FAR

TELE

q Loosen the zoom lock knob and move the

knob between TELE and WIDE to obtain

the appropriate angle of view. Tighten the

zoom lock knob.

w Loosen the focus lock knob and move the

knob between FAR and NEAR to obtain

the optimum focus. Tighten the focus lock

knob.

Note:

• To change the angle of view by moving the

zoom lock knob, also move the focus lock

knob to adjust the focus.

Mount the dome cover and inner

dome.

Tighten the screws that have been loos-

ened in Step 2 in page 22 using the sup-

plied driver bit.

(Recommended tightening torque:

0.78 N·m {0.58 lbf·ft})

Important:

• Attach the inner dome in accordance with

the lens direction to not to change the lens

direction.

• Check if the tabs of the inner dome are

firmly fit.

• Remove the protection sheet from the out-

side of the dome.

Cutout for

mounting

Groove for

mounting