Panasonic WVBP554 - CCTV B/W CAMERA 사용 설명서 - 페이지 18
{카테고리_이름} Panasonic WVBP554 - CCTV B/W CAMERA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVBP554 - CCTV B/W CAMERA 36 페이지. Super dynamic dsp b/w cameras
Panasonic WVBP554 - CCTV B/W CAMERA에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지), 사양 (2 페이지)
페이지 인쇄
2. SETUP OPERATION
This camera utilizes a user setup menu (CAM SET UP)
that is displayed on the monitor.
To set items on the CAM SET UP menu, use the follow-
ing buttons on the side panel.
Left Button
Set Switch
Up Button (
):
This button is used to move the
cursor upwards. Use this button to
select an item or adjust the para-
meters.
Down Button (
): This button is used to move the
cursor downwards. Use this but-
ton to select an item or adjust the
parameters.
Right Button (
): This button is used to move the
cursor to the right. Use this button
to select or adjust the parameters
of the selected item. The parame-
Left Button (
Set Button (
Up Button
Right Button
Down Button
• All Reset Operation
All Reset allows you to reset all setup menu items to
the factory settings if you are unsure about the correct
settings. Proceed as follows:
(1) Make sure that the CAM SET UP menu is not dis-
played (a camera picture is displayed).
(2) While pressing both
few seconds. The words ALL RESET momentarily
appear on the monitor.
At this time all adjustments and parameters are
reset to the factory default settings.
-16-
ter changes each time this button
is pressed.
):
This button is used to move the
cursor to the left. Use this button
to select or adjust the parameters
of the selected item. The parame-
ter changes each time this button
is pressed.
This button is used to set the
):
determined parameter. If the item
has its own setting menu (
cates that the setting menu
exists), press this button to dis-
play the setting menu.
and
, press
indi-
for a