Panasonic WVBP554 - CCTV B/W CAMERA 사용 설명서 - 페이지 10
{카테고리_이름} Panasonic WVBP554 - CCTV B/W CAMERA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVBP554 - CCTV B/W CAMERA 36 페이지. Super dynamic dsp b/w cameras
Panasonic WVBP554 - CCTV B/W CAMERA에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지), 사양 (2 페이지)
페이지 인쇄
2. 24 V AC Power Supply
Connect the power cable to the AC/DC compatible
input terminal on the rear panel of the camera.
DC 12V
AC 24V
IN
IN
1
2
GND
Recommended wire gauge sizes for 24V AC line.
Copper wire
#24
size (AWG)
(0.22mm
2
)
(0.33mm
Length
(m)
95
of Cable
(Approx.)
(ft)
314
Caution:
To prevent fire or electric shock hazard, a
UL listed wire (VW-1, style 1007) should be
used for the cable.
24 VAC, 60 Hz
(19.5 V - 28 V)
#22
#20
#18
2
)
(0.52mm
2
)
(0.83mm
2
)
150
255
425
495
842
1,403
Video Cable
1. It is recommended to use a monitor whose resolu-
tion is at least equal to that of the camera.
2. Set the termination switch to the 75
the last monitor.
A. Use a 75 coaxial cable.
B. Set the termination switch to the 75
on the last monitor and to the Hi-Z position on
the other monitors. Do not change the posi-
tions after setting.
IN
C. The maximum extensible coaxial cable length
between the camera and the monitor is shown
below.
-8-
position on
position
Monitor
Monitor
VIDEO
VIDEO
OUT
75
IN
OUT
Hi-Z
75
Hi-Z