Panasonic WVBP554 - CCTV B/W CAMERA 사용 설명서 - 페이지 19
{카테고리_이름} Panasonic WVBP554 - CCTV B/W CAMERA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVBP554 - CCTV B/W CAMERA 36 페이지. Super dynamic dsp b/w cameras
Panasonic WVBP554 - CCTV B/W CAMERA에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지), 사양 (2 페이지)
페이지 인쇄
• Opening the Setup Menu
Press and hold down
for a second or longer.
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
MOTION DET
LENS DRIVE
END
SET UP DISABLE
The CAM SET UP menu appears on the monitor as
shown above.
Check the current settings on the menu.
Refer to the sections below for a detailed description of
menu items. If you decide not to make any changes
after checking the current settings, move the cursor to
END at the start of the bottom line, and press
close the CAM SET UP menu and return to normal
camera picture mode.
Note: If no button is pressed for 6 minutes while the
CAM SET UP menu or any other setting menu is
displayed, displaying the menu is automatically
canceled and the mode returns to the normal cam-
era picture.
Blinking
OFF
ALC
---
ON
OFF
INT
OFF
DC
to
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
MOTION DET
LENS DRIVE
END
• Editing the CAM SET UP Menu
Important Notice:
When the words SET UP DISABLE appear on the
bottom line of the CAM SET UP menu, you cannot
change the currently active settings. This is to pre-
vent accidental changing of the settings.
To edit the CAM SET UP menu (change settings), use
and
or
and
UP DISABLE in the bottom line.
Press
. SET UP DISABLE changes to SET UP
ENABLE. Move the cursor to END, then to the item(s)
you want to change.
-17-
OFF
ALC
---
ON
OFF
INT
OFF
DC
SET UP DISABLE
to move the cursor to SET