aquatherm AT600 소유자 운영 매뉴얼 - 페이지 3
{카테고리_이름} aquatherm AT600에 대한 소유자 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aquatherm AT600 12 페이지. Swimming pool & spa heat pumps
aquatherm AT600에 대해서도 마찬가지입니다: 소유자 운영 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지)
Unit Description
DATA
PLATE
WATER OUT
2" MALE
THREADED
UNION
How A Heat PumpWorks
A swimming pool & spa heat pump
utilizes proven refrigerant technology
to capture the heat in the outside air
and transfers it to the pool water. Re-
frigerant is used because of its ability
to absorb and transfer heat energy.
The fan circulates air through the
outer evaporator air coil that acts as
a heat collector. The liquid refrigerant
in the air coil absorbs the available
heat in the ambient air, transforming
it into a gas. The refrigerant gas is
then pumped into the compressor.
When this warmed gas is com-
pressed, it intensifies or concentrates the heat, like a magnifying glass in the sun.
This intensely hot gas is then pumped into the heat exchanger condenser, where the
actual heat transfer takes place. As the pool water passes through the heat exchanger,
the hot gas gives up its heat to the cooler pool water. The refrigerant returns to a liquid
state and is pumped through the expansion valve then into the evaporator air coil to start
the process all over again.
How Efficient Is It ?
This graph is a operational cost comparison for
equal amounts of pool heat. As you can see
heat pump is the most efficient way to heat
your pool.
Compared to L.P. gas heaters, a heat pump
produces 5 to 6 times more heat for every $1.00
you spend on operation.
WATER IN
2" MALE THREADED
UNION
Page 3
AIR DISCHARGE FAN
WARNING:
ROTATING BLADE
KEEP HANDS & HAIR
CLEAR!
with
CONTROLS
LED READOUT
ELECTRICAL
INSTALLATION
PORT(S)