Diamond Products CC1600 운영자 매뉴얼 - 페이지 14
{카테고리_이름} Diamond Products CC1600에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond Products CC1600 16 페이지. Wall saw
페이지 인쇄Proper preventative maintenance is essential to ensure a long service life, minimize
downtime for repair and provide for safe, efficient operation. We recommend the
following service schedule.
DAILY
Check roller and slide alignment and for flat spots on the rollers or other
•
conditions which might prevent free rotation. Grease rollers at least once a day.
•
Check for smooth, free arm and travel motion.
•
Check water flow.
•
Check for hydraulic fluid leaks at the blade and travel motor connections.
•
Check blade guards and flanges for damage. Replace if damaged.
WEEKLY
•
Check hydraulic couplings for damage and replace if necessary.
ANNUALLY
•
Major service to be carried out by Diamond Products or an authorized service
representative.
MISCELLANEOUS
Periodically check for low gear oil in the pivoting gearbox assembly and add gear oil
•
in accordance with table 4 as required.
•
Periodically check the lubrication of the main housing gears. If replacement is
necessary, wipe out the old lubricant and fill the gear cavity with new lubricant in
accordance with table 4 as required.
Disconnect the power unit before servicing the saw.
Chapter 6
MAINTENANCE
WARNING!