AQUATHERMA NATURE LAGON 소유자 매뉴얼 - 페이지 12
{카테고리_이름} AQUATHERMA NATURE LAGON에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUATHERMA NATURE LAGON 16 페이지.
페이지 인쇄
ACCESSORIES
WATERFALL (standard and LED light)
The waterfall mechanism is essentially the same and can be easily
installed whether you have the standard model or the LED light
model, both available as options.
All you need to do is incorporate them into a riprap or a wall
close enough to the pool, following the recommendations in the
spa installation document to ensure that all the water in the
waterfall returns to the spa basin, thus avoiding premature water
loss from your spa.
The waterfall light system must have access on the sides to be able to
change the ribbon lighting which is inside the system.
To activate the waterfall, simply turn the valve usually red or blue
near the waterfall.
The waterfall mechanisms must NEVER be left operating in
the winter due to the risk of frost. Refer to the chapter on
closing procedures to find out how to proceed with the winter
preparation of the waterfall system.
NEVER leave the waterfall running in the winter or when the
cover is installed on the spa.
SEALING PLUGS (closing the spa)
Sealing plugs must be used if the spa is not used during the cold
period. They will be positioned in place of the jets during spa
closing procedures. Refer to the Closing Procedures section for
the spa closing steps.
SPA SWEEPER
There are various types of spa sweeper. Some use batteries while
others are simply manual. Each varies in price and efficiency. Ask
your dealer for the available ranges.
Optional
LED waterfall light
system
11''
9''
Standard waterfall
system
Waterfall valve
Sealing plugs
Spa sweeper
24''
11