Diamond Products DP80375 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Diamond Products DP80375에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond Products DP80375 12 페이지. Dust control burnisher

페이지 인쇄

adjustment knob to the right to reduce

pad pressure. YELLOW LIGHT(S): If one

or both yellow lights is illuminated, stop

the machine and turn the pad pressure

adjustment knob to the left to increase

the amount of pad pressure. GREEN

LIGHT(S): If one, two or three green

lights are illuminated, the machine is

running at the optimal pad pressure

and you may begin working.

11] When the machine is in operation,

both hands should be gripping on the

handle.

12] To stop the machine at any time,

simply release the switch lever, and the

machine will stop automatically.

MAINTENANCE

To keep the machine performing well for

many years, please follow the following

maintenance procedures.

* Always confirm that the machine is

unplugged

prior

maintenance or repairs.

1] Unplug machine as soon as you are done

using it.

2) Remove dust recovery bag and empty

contents

into

Inspect dust recovery bag for any

damage prior to replacing it on the

machine.

3] Clean the outside of the machine with a

mild cleaner.

4] Check power cord for any damage. If

any damage is detected, replace the

cord immediately.

5] Lubricate wheels with a water resistant

lubricant every month.

-5-

performing

any

trash

receptacle.

6] Check machine for loose or missing nuts

and bolts, and replace as necessary.

7] If the machine is used in a dusty

environment, you may remove the

motor cover and blow the motor clean

with compressed air. This will allow for

good ventilation and help the motor run

cooler.

STORAGE

1] Unplug machine from power source.

2] Store in upright position in a dry area.

Diamond Products

Operator's Manual