Diamond Products CSE12 운영자 매뉴얼 - 페이지 13
{카테고리_이름} Diamond Products CSE12에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond Products CSE12 20 페이지. Electric chainsaw
Diamond Products CSE12에 대해서도 마찬가지입니다: 부품 목록 및 사용 설명서 (20 페이지)
페이지 인쇄
EQUIPMENT DESIGNATION OPERATOR'S MANUAL
without loosening the side cover nuts could
result in damage to the adjustor mechanism.
•
While holding the guide bar upward from
the nose end, turn the tension adjustor
clockwise to tighten.
•
Rotate the chain by hand, grabbing the
chain by its diamond segments, to ensure
the chain rotates freely.
•
WARNING: Wear gloves when handling
the chain and bar. Keep fingers away from
the edges of the guide bar rails. When
worn, they will have a very sharp edge.
•
When the associated parts have some
wear, there will be some positions where
the chain is looser and other positions
where it is tighter. Find the tightest point,
and make the final adjustment at that
position.
•
Tension is correct when the chain is free to
run around the guide bar, and the chain
will hang with the drive links just barely
engaging the guide bar groove at the
bottom center position.
•
Once adjustment is satisfactory, the 2 side
cover nuts may be tightened. While still
holding guide bar upward, tighten the 2
side cover nuts firmly.
•
CAUTION: Running the saw with the side
cover nuts loose will cause a hazardous
situation and could lead to damage to the
tension adjustor mechanism.
13