Diamond Systems Athena III 사용자 설명서 - 페이지 7

{카테고리_이름} Diamond Systems Athena III에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond Systems Athena III 14 페이지. Panel i/o board

SBC I/O SECTION – BOTTOM SIDE

All these connectors are on the bottom side of the panel I/O board. Their locations and pinouts match exactly the

corresponding connectors on the Athena III SBC. The pin numbering of these connectors, when facing the

connector, is reversed from the pin numbering on the male pin headers.

The power signals on these connectors come from either the front panel input power connector via jumpers, or an

external switch, and connect to the power signals on the PC/104 connector of the Athena III SBC.

This connector provides a connection for VGA monitors. Note that while the DDC serial detection pins are

present, there is no 5V supply provided, nor are the old "Monitor ID" pins used.

Athena III Panel I/O Board User Manual Rev A

MDI0+

MDI0-

MDI1+

MDI1-

MDI2+

MDI2-

MDI3+

MDI3-

GND

+5V

GND

+12V

GRN

RED

BLU

GND

HSYN

DDAT

VSYN

DCLK

www.diamondsystems.com

Page