Panasonic DLP PT-D12000U 설정 및 운영 매뉴얼 - 페이지 29

{카테고리_이름} Panasonic DLP PT-D12000U에 대한 설정 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic DLP PT-D12000U 37 페이지. 3-chip dlp projector
Panasonic DLP PT-D12000U에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지)

페이지 인쇄

Warning/Error Generating Conditions

When a warning or error is detected, the projector unit will be set to the following status.

Detected warning/error

Temperature warning

Temperature error

Lamp warning

Lamp error

Filter warning

Filter error

Other warning

Other error

For further details, refer to the operation manual of the projector.

Intake temperature, exhaust temperature or optical module temperature is high.

Optical module temperature is low.

Intake temperature, exhaust temperature or optical module temperature is high.

Optical module temperature remained low for a certain time duration.

Intake temperature, exhaust temperature or optical module sensor is disconnected.

Lamp replacement time has been reached.

Lamp replacement is overdue, lamp illumination failed, lamp is not installed, or lamp is

malfunctioning.

Low remaining amount of ARF.

Filter is clogged, ACR/ARF is not installed, filter winding failed,

or there is no remaining ARF.

—

Lamp unit cover remaining open, fan error, shutter error, aperture error, color wheel error,

ACR/ARF not installed, filter cleaning process time-out, DC voltage error, lens shift error,

internal clock battery replacement required, no response from internal IC, software version

check error, microcomputer software error, microcomputer internal error, etc.

Projector status