Panasonic et-jpc100be 설치 지침 매뉴얼 - 페이지 18

{카테고리_이름} Panasonic et-jpc100be에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic et-jpc100be 28 페이지.

Installation (continued)

Changing the orientation of the main unit of the projector.

This section describes changing the orientation of the main unit of the projector to make the mounting work of the

projector mount bracket easier to do.

Rotating ﬁ xing

4) Tighten the ﬁ xing screw.

 Tighten the rotating ﬁ xing screw with the allen wrench (3.0 mm [1/8"] across ﬂ ats) supplied with the

projector to prevent the main unit moving during the mounting work.

Note

 The rotating ﬁ xing screw is a hexagon socket head screw (M6). Take care because it will come out of the

projector if loosened too much.

18 - ENGLISH

screw

Shaft holder

Main unit

1) Place the projector on a cloth or the like that

has been laid on a ﬂ at surface.

2) Loosen the ﬁ xing screw.

 Loosen the rotating ﬁ xing screw of the projector

with the allen wrench (3.0 mm [1/8ʺ] across

ﬂ ats) supplied with the projector.

3) Change the orientation of the main unit.

 Loosening the rotating ﬁ xing screw enables

rotation of the shaft holder so that the

orientation of the main unit can be changed.