Panasonic et-jpc100we 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Panasonic et-jpc100we에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic et-jpc100we 28 페이지.

페이지 인쇄

Before installation (continued)

 Projection distance (when aspect ratio 16:10)



The following shows the dimensional relationship between the projector and projection surface.

The dimensions included in the following table have a slight error. Also, when keystone correction is performed

on the projector side, correction is made so that the projected image size becomes smaller than the speciﬁ ed

screen size.

Projected image size

Diagonal (SD)

0.76 (30")

1.02 (40")

1.27 (50")

1.52 (60")

1.78 (70")

2.03 (80")

2.29 (90")

2.54 (100")

3.05 (120")

3.81 (150")

5.08 (200")

 Projection distance formula (when aspect ratio 16:10)



To use an image size not listed in this manual, check the projected image size SD (m) and use the respective

formula to calculate projection distance (L).

The unit of the formula is all "m". (Value obtained by the following calculation formula contains a slight error.)

When calculating a projection distance using image size designation (value in inches), multiply the value in

inches by 0.0254 and substitute it into SD in the formula for calculating the projection distance.

Minimum projection

Maximum projection

 Mounting hole dimensions



Unit: mm

(1-1/4")

Height (SH)

0.404

0.538

0.673

0.808

0.942

1.077

1.212

1.346

1.615

2.019

2.692

distance (LW)

distance (LT)

31.5

77.5 (3-1/16")

41.5

(1-5/8")

Width (SW)

Min. (LW)

0.646

0.862

1.077

1.292

1.508

1.723

1.939

2.154

2.585

3.231

4.308

L = 1.2976 × SD - 0.0385

L = 2.7999 × SD - 0.0379

370 (14-9/16")

360 (14-3/16")

436 (17-5/32")

Projection distance (L)

Max. (LT)

0.95

2.10

1.28

2.81

1.61

3.52

1.94

4.23

2.27

4.94

2.60

5.65

2.93

6.36

3.26

7.07

3.92

8.50

4.91

10.63

6.55

14.19

5 (3/16")

ENGLISH - 11

(Unit: m)