Panasonic ETJPC200BU 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Panasonic ETJPC200BU에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic ETJPC200BU 30 페이지.

Product composition

Check that the package contains the following parts. The number enclosed in < > is the quantity.

Attachment plate <1>

Falling prevention wire

Projector mount bracket <1>

Adapter cover <1>

String <1>

Power cord

(K2CM3YY00038) <1>

(K2CT3YY00078) <1>

Screw with captive washer (M4 x 8) <8>

(ET-JPC200BE: XYN4+F8FJK)

(ET-JPC200WE: 4112055002)

Attention

z After removing the product from the package, dispose of the power cord cap and packing material appropriately.

z The supplied power cord should not be used with projectors other than specified.

z If any part is missing, please contact the dealer.

z Store small parts appropriately in a place out of the reach of infants and small children.

The attachment plate is mounted to the wall or ceiling to

support the entire product.

The falling prevention wire is secured with tape at the

inner side of the attachment plate.

The projector mount bracket is mounted to the projector

and then attached to the attachment plate.

The adapter cover hides the <AC IN> socket part of the

projector.

This is to prevent the adapter cover from dropping.

Connect to the <AC IN> socket of the optional projector.

These are used to mounting or assembling the product.

ENGLISH - 7