Panasonic PLC-XP40 소유자 매뉴얼 - 페이지 37

{카테고리_이름} Panasonic PLC-XP40에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PLC-XP40 44 페이지. Multimedia projector

페이지 인쇄

SETTING/APPENDIX

USB

This Projector is equipped with USB port for interactive operation

between a projector and computer. Set mode following steps below.

Wireless Mouse mode

Select "

" when controlling a computer with Remote Control of

this projector.

Projector mode

Select "

" when controlling a projector with computer.

NOTE: Before you control a projector by computer, install USB driver

(optionally sold parts) and set up computer following instruc-

tion in USB driver package. Contact your authorized dealer.

Quit

Closes SETTING MENU.

Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most

Personal Computers. POINT buttons and two CLICK buttons are used for wireless mouse operation.

This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen. When ON-

SCREEN MENU or any message / dialog box is displayed on screen instead of PC mouse pointer, this Wireless Mouse

function cannot be used.

To use Wireless Remote Control Unit as Wireless Mouse for a Personal Computer, installation of mouse driver (not supplied)

is required. Make sure that mouse driver is properly installed in your computer. And make sure that mouse port (or USB

port) of a Personal Computer is activated.

Connect mouse port (or USB port) of your computer to Control

Port (or USB connector) of this projector with Control Cable (or

USB cable). (Refer to page 11, 12 for connection.)

Turn a projector on first, and then turn on your computer. When

computer is switched on first, Wireless Mouse may not work

properly.

When controlling a PC mouse pointer, operate Wireless Mouse with POINT button, SELECT button, and RIGHT CLICK

button on Wireless Remote Control Unit.

POINT button

Used to move PC mouse pointer. Pointer is moved corresponding

with direction you are pressing.

SELECT (LEFT CLICK) button

This button has same function as left button in a PC mouse.

RIGHT CLICK button

This button has same function as right button in a PC mouse. This

button is not available for controlling this projector.

OPERATING WIRELESS MOUSE

INSTALLATION

OPERATING WIRELESS MOUSE

USB

Press SELECT button at this icon to

display previous items.

Move pointer to item and then press

POINT LEFT/RIGHT button(s).

Note : When your computer has no mouse

port, connect Serial Port of your

computer to Control Port of a projector

with Control Cable for Serial Port (not

supplied).

POINT button (Move pointer)

SELECT button

RIGHT CLICK button

(left button of mouse)

(right button of mouse)