Panasonic PT AE1000U 빠른 시작 매뉴얼
{카테고리_이름} Panasonic PT AE1000U에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT AE1000U 4 페이지. Ceiling mount bracket safeguards
페이지 인쇄
CEILING MOUNT BRACKET SAFEGUARDS
The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided
with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security.
NOTE:
•
Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount
bracket which is not purchased from an authorised distributors, or environmental conditions.
•
Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
•
Installation work of the ceiling mount bracket should only be carried by a qualified technician.
•
Remove an unused ceiling mount bracket promptly.
Installing the safety cable
1. Install the ceiling mount bracket according to the Installation Instructions.
2. Loop the security cable around the ceiling mount bracket with less slack.
•
Lace the cable of the end with a latch through the loop on the other end of the cable.
3. Attach the latch on to the bottom of the projector with a provided screw.
•
Torque: 125±20 N·cm
TQDJ19046