Panasonic PT-AE100E 사용 설명서 - 페이지 15

{카테고리_이름} Panasonic PT-AE100E에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-AE100E 27 페이지. Panasonic lcd projector operating instructions

페이지 인쇄

1. Replacing the Lamp Unit

Using the DIGITAL ZOOM function

This function lets you enlarge a

single section of the picture.

Furthermore, the spot display mode

which is used to select the section

which is to be enlarged can also be

used when making presentations.

# Press a DIGITAL ZOOM +/-

button.

The projector will change to spot

display mode.

$ Use the F F , G G , I I and H H

buttons to move the spot to the

section which you would like to

enlarge, and then press the

ENTER button.

The area around the spot will

then be enlarged to twice the

normal size.

% Use the DIGITAL ZOOM +/-

buttons to change the

enlargement ratio.

The enlargement ratio can be

changed within the range of x1 to

x2, in steps of 0.1.

NOTE:

B When PC signals are being input,

the enlargement ratio can be

changed within the range of x1 to

x3.

28-E

NGLISH

& Press the MENU button to

return to the normal screen.

The projector will not return to

spot display mode at this time. To

return to spot display mode, clear

the enlarged picture display from

the screen and then press a

DIGITAL ZOOM +/- button again.

NOTE:

B This function can only be used

when using the remote control

unit.

B If the type of signal being input

changes while the digital zoom

function is being used, the digital

zoom function will be cancelled.

Correcting keystone distortion

When either the projector or the screen is tilted, the keystone distotion will

affect the image. You can correct the image proportions by the following

procedure.

# Use the KEYSTONE buttons to obtain image balance.

You can also correct keystone distortion by selecting the KEYSTONE item

in the MAIN MENU and pressing ENTER.

Picture condition

Press the

$ Press the MENU button to return to the previous screen.

NOTE:

B Keystone distortion can be corrected to ±30° of the angle of tilt for the

projector. However, the greater the correction amount, the more the

picture quality will deteriorate, and the harder it will become to achieve a

good level of focus. To obtain the best picture quality, set up the projector

and screen in such a way that the amount of keystone correction required

is as minimal as possible.

B The picture size will also change when correction of keystone distortion is

carried out.

Operation

or H H button.

or I I button.

-29

NGLISH