Panasonic PT-AE4000E 기능별 지침 - 페이지 43
{카테고리_이름} Panasonic PT-AE4000E에 대한 기능별 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-AE4000E 50 페이지. Full high-definition home cinema projector
Panasonic PT-AE4000E에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지), 브로셔 및 사양 (6 페이지), 기능별 지침 (50 페이지)
페이지 인쇄
J Cable specifications
(When connected to a personal computer)
J Control commands
Command
Control contents
PON
POWER ON
POF
POWER OFF
IIS
INPUT
OMN
MENU
OEN
ENTER
OBK
RETURN
OCU/OCD/
Navigation buttons
OCL/OCR
OLE
LENS
OST
DEFAULT
OFZ
FREEZE
FC1
FUNCTION BUTTON
OOT
SLEEP
OSH
BLANK
OVM
PICTURE
OWM
WAVEFORM
VS1
ASPECT
VPM
PICTURE MODE
OMM
MEMORY LOAD
DPA
PICTURE ADJUSTMENT Same function as the PICTURE ADJUSTMENT button on the remote control.
DCM
COLOUR MANAGEMENT Displays the COLOUR MANAGEMENT menu.
OVL
VIERA LINK
OSM
SUB MENU
Projector
In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp ON control.
If a PON command is received while the cooling fan is operating after the lamp has switched
off, the lamp is not turned back on again straight away in order to protect the lamp.
CP1 = COMPONENT IN
SVD = S-VIDEO IN
HD1 = HDMI1 IN
HD3 = HDMI3 IN
Displays the main menu.
Activates the selected items in the menu mode.
Returns to the previous menu or escaping from the menu mode.
OCU = ▲ cursor
OCD = ▼ cursor
Same function as the LENS button on the remote control.
Resets to the factory default setting. (page 14)
Freezes the projected screen.
0 = OFF
Activates the function that is assigned to the FUNCTION button of the remote control.
Sets the duration of time to turn off the power automatically. (See "SLEEP" on page 41.)
0 = OFF
1 = 60 min.
5 = 180 min.
6 = 210 min.
Turns off the projection temporarily.
Sends the command to switch between ON and OFF.
Do not send the command consecutively.
Activates the PICTURE menu. Send the command to switch menu items. (page 13)
Activates the WAVEFORM. (page 14)
0 = OFF
1 = FULL SCAN (Y)
2 = FULL SCAN (R)
3 = FULL SCAN (G)
4 = FULL SCAN (B)
Switches the aspect ratio. (page 32)
Switches the PICTURE MODE. (page 13)
NOR = NORMAL
DYN = DYNAMIC
CN1 = CINEMA1
CN2 = CINEMA2
Same function as the MEMORY LOAD button on the remote control.
Same function as the VIERA Link button on the remote control.
Same function as the SUB MENU button on the remote control.
▼
Technical Information
NC
NC
NC
NC
Remarks
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
OCL = ◄ cursor
OCR = ► cursor
1 = ON
2 = 90 min.
3 = 120 min.
7 = 240 min.
5 = SINGLE LINE SCAN (Y)
6 = SINGLE LINE SCAN (R)
7 = SINGLE LINE SCAN (G)
8 = SINGLE LINE SCAN (B)
CL1 = COLOUR1
CN3 = CINEMA3
NC
NC
PC (DTE)
NC
NC
4 = 150 min.
CL2 = COLOUR2
E
NGLISH - 43