Panasonic PT-AE4000U 기능별 지침 - 페이지 46
{카테고리_이름} Panasonic PT-AE4000U에 대한 기능별 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-AE4000U 50 페이지. Full high-definition home cinema projector
Panasonic PT-AE4000U에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지), 브로셔 및 사양 (6 페이지)
페이지 인쇄
VIERA Link™ Connection
VIERA Link "HDAVI Control™"
Connections to the equipment (DIGA Recorder, HD Camcorder, Player theater, Amplifier, etc.) with HDMI cables
allow you to interface them automatically.
These features are limited to models incorporating "HDAVI Control" and "VIERA Link".
Some functions are not available depending on the equipment's version of HDAVI Control.
Please confirm the connected equipment's version of HDAVI Control.
But some functions will not be able to perform even if the versions are the same.
VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard
known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.
As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed.
Please refer to individual manuals for other manufacturers' equipment supporting Link function.
About applicable Panasonic equipment, consult your local Panasonic dealer.
Preparations
J
Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized.
Set up the connected equipment.
Switch the connected equipment ON.
Set VIERA LINK ON in the Setup Menu.
(Please read the manual of the equipment for these setup.)
Set up the projector
Switch the projector ON.
Select the input mode to HDMI1, HDMI2 or HDMI3, and make sure that an image is displayed
correctly.
Select VIERA LINK SETTINGS in the OPTION menu.
If the VIERA LINK is set to ON, you need to select OFF first, and then switch to ON again to activate
the ON setting.
NOTE:
This setup should be done each time when the following conditions occur:
•
When using for the first time
•
When adding or reconnecting equipment
•
When changing setup
E
46 -
NGLISH