Panasonic PT-AE700 사용 설명서 - 페이지 16
{카테고리_이름} Panasonic PT-AE700에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-AE700 32 페이지. Panasonic lcd projector operating instructions
페이지 인쇄
Setting the aspect ratio (ASPECT)
This projector allows you to change the aspect ratio to match the type of
input signal.
Press the ASPECT button.
BPressing the ASPECT button will change the
aspect ratio according to the successive settings
shown below.
BIllustrations for aspect ratio settings are shown
on the next page. Refer to this illustration for
assistance in selecting a suitable aspect ratio.
JUST \ 4:3 \ 16:9 \ 14:9 \ ZOOM1 \ ZOOM2
S-VIDEO/VIDEO/
[When NTSC, 525i (480i) or 525p (480p) signal is being input]
YP
P
/SCART
B
R
AUTO \ 4:3 \ 16:9 \ JUST \ ZOOM
4:3 \ 16:9 \ V SCROLL
PC
4:3 \ 16:9
HDMI
[When 525p (480p) or 625p (576p) signal is being input]
4:3 \ 16:9 \ JUST \ ZOOM
B When "WSS" is set to "ON"(page 46), the projector switches the aspect ratio
automatically if the input signal has a detector signal.
B "WIDE" is displayed on the screen when "ASPECT" is set automatically (when
"WSS" is set to "ON"). Press the ASPECT button to switch the aspect ratio.
B The aspect ratios for the following signals are fixed, and cannot be
changed. (Refer to page 58.) 1 125 (1 080) /60i, 1 125 (1 080) /50i, 750
(720) /60p, 750 (720) /50p, WIDE 480/600/720/768/768-2
*WIDE768 signals can be set to "V SCROLL".
NOTE:
B If a selected mode does not match the aspect ratio of the input signal, it
may affect the quality of viewing of the original picture.
B If using this projector in places such as cafes or hotels to display
programmes for a commercial purpose or for public presentation, note that
if the aspect ratio selection function is used to change the aspect ratio of
the screen picture, you may be infringing the rights of the original copyright
owner for that programme under copyright protection laws.
B If a 4:3 picture is projected onto a 16:9 screen, distortion may occur around the
edges of the picture so that part of the picture is no longer visible. Programmes
which have 4:3 aspect ratios should be viewed in 4:3 mode to give proper
consideration to the aims and intentions of the original programme's creator.
B Image sizes such as Cinema-Vision that project wider than the 16:9
ratio will have narrow black fields at the top and bottom.
B "AUTO" will be displayed according to the type of the signals being input.
When set to "AUTO", the projector switches the aspect ratio automatically
if the input signal has a detector signal.
B You can also change the aspect ratio from the "POSITION" menu.
B When set to "V SCROLL", vertical position can be adjusted by pressing the G and
F buttons (close the "POSITION" menu screen before adjusting vertical position).
30-E
NGLISH
ASPECT
Input signal
4:3
4:3 input signal
16:9
Squeezed signal (image
contracted horizontally)
14:9
14:9 letterbox signal
JUST
4:3 input signal
ZOOM
Letterbox signal
ZOOM1
ZOOM2*
V SCROLL
4:3 input signal
(XGA/MXGA/SXGA/
WIDE768 only)
*"ZOOM2" is for 2.35 : 1 letterbox signals.
Projected image
4:3
Horizontal expansion of
projected image
Expansion preserves
original ratio
Horizontal expansion of projected image
(Centre of image is less distorted.)
Expansion preserves
original ratio
A picture is projected without
expansion or reduction.
E
-31
NGLISH