Panasonic PT-CW331R 사양 - 페이지 12

{카테고리_이름} Panasonic PT-CW331R에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-CW331R 13 페이지. Ultra-short throw 1-chip dlp projectors pt-cw3330 series
Panasonic PT-CW331R에 대해서도 마찬가지입니다: 사양 (6 페이지)

페이지 인쇄

1. Standard Setting-Up Position

Ultra Short-Throw DLP

Notes on projector placement and operation

The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the

following precautions.

Never place objects on top of the projector while it is operating.

Make sure there is the unobstructed space as shown below or more around the projector's exhaust

openings. In addition to this space, also ensure that there is a sufficient work space for removing

and installing the lamp, air filter and other parts.

Make sure that nothing blocks the projector's air intake and exhaust openings. Also, install the pro-

jector so that cool or hot air from other air conditioning equipment does not flow directly toward the

projector's air intake or exhaust openings.

Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed

space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the

intake opening. This may cause the projector's protective circuit to interrupt projector operation.

100 mm (3-15/16˝)

or more

Direction of air intake and exhaust

As of June 2013

SFD13M001-1

™

Projector

500 mm (19-11/16˝)

or more

PT-CW331R

1000 mm (39-3/8˝)

or more

Intake

Exhaust

1 2 / 1 3