Panasonic PT-D6000S 사양 시트 - 페이지 2

{카테고리_이름} Panasonic PT-D6000S에 대한 사양 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-D6000S 2 페이지. Dlp-based projector
Panasonic PT-D6000S에 대해서도 마찬가지입니다: 사양 시트 (10 페이지), 사양 시트 (12 페이지)

페이지 인쇄

Specifications

Models

Power supply

Power consumption

DLP

chip Panel size

™

Display method

Pixels

Lens

Powered zoom/focus lenses (1.8– 2.4:1), F 1.7– 2.0, f 26.8 –35.7 mm

Lamp

Screen size

Brightness*

Center-to-corner uniformity*

Contrast*

Resolution

Scanning

RGB

Horizontal: 15–91 kHz, Vertical: 50– 85 Hz, Dot clock: 162 MHz or lower

frequency YP

(YC

)

S-Video/Video

Optical axis shift

Keystone correction range

Installation

Other features

Multi-Screen Support System, Geometric Adjustment

Terminals

DVI-D IN

RGB 1/YP

RGB 2/YP

VIDEO IN

S-VIDEO IN

SERIAL IN

SERIAL OUT

REMOTE 1 IN

REMOTE 1 OUT

REMOTE 2 IN

LAN

HD-SDI*

Power cord length

Cabinet material

Dimensions (W x H x D)

Weight*

Operating temperature

Operating humidity

Supplied accessories

*1 During eco stand-by mode operation, network functions such as standby-on from a LAN network and the serial output terminal will not operate. *2 Brightness: 3,000 lumens (PT-DZ6710/DZ6700/DW6300), 3,250 lumens (PT-D6000).

*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 SD-SDI is also supported. *5 Average value. May differ depending on models.

Optional accessories

Lens

Zoom lens ET-DLE150

1.3 – 1.9:1 (PT-DZ6710/DZ6700)

1.4 – 2.0:1 (PT-DW6300)

1.3 – 2.0:1 (PT-D6000)

Zoom lens ET-DLE250

2.3 – 3.6:1 (PT-DZ6710/DZ6700)

2.4 – 3.8:1 (PT-DW6300)

2.4 – 3.7:1 (PT-D6000)

Zoom lens ET-DLE350

3.6 – 5.4:1 (PT-DZ6710/DZ6700)

3.8 – 5.7:1 (PT-DW6300)

3.7 – 5.6:1 (PT-D6000)

Zoom lens ET-DLE450

5.4 – 8.6:1 (PT-DZ6710/DZ6700)

5.6 – 9.0:1 (PT-DW6300)

5.5 – 8.9:1 (PT-D6000)

Fixed focus lens ET-DLE055

0.8:1

PT-DZ6710

North America: 820W or less, Standby mode eco: 0.2W Standby mode normal: 8 W (Both with fan stopped)*

Europe, Asia: 800 W or less, Standby mode eco: 0.3W Standby mode normal: 9 W (Both with fan stopped)*

0.67˝ diagonal (16:10 aspect ratio)

2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels

50– 600 inches (50–200 inches with the ET-DLE055), 16:10 aspect ratio

6,000 lumens (dual lamp, high power mode)

1,920 x 1,200 pixels

525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1035/60i, 125 (1080)/60i, 1125 (1080)/50i,

Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz, (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)

Vertical: +50% (powered), horizontal: ±10% (powered)

RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink™

BNC x 1

Power cord, Wireless/wired remote control unit, Batteries for remote control (x 2), Wire rope

Lamp

Replacement lamp unit

ET-LAD60

ET-LAD60W (twin pack)

Filter

Replacement filter unit

ET-ACF100

Ceiling mount bracket

ET-PKD56H

(for high ceilings)

ET-PKD55S

(for low ceilings)

ET-PKD55S

ET-PKD56H

PT-DZ6700

North America: 120V AC 60Hz

Europe, Asia: 220-240V AC, 50/60Hz

0.65˝ diagonal (16:10 aspect ratio)

DLP™ chip x 1, DLP™ system

1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels

300 W UHM lamps (x 2) (dual lamp system)

90%

2,000:1 (full on/full off, contrast mode: high)*

1080/24p, 1080/25p, 1080/30p, 1080/24sF, 1080/60p, 1080/50p

Vertical: +60% (powered), horizontal: ±10% (powered)

Vertical: ±30°

Ceiling/floor, front/rear

Multi-Screen Support System

DVI-D 24-pin

BNC x 5

D-sub HD 15-pin

BNC

Mini DIN 4-pin

D-sub 9-pin x 1 (RS-232C compliant)

D-sub 9-pin

M3 jack

D-sub 9-pin

3.0 m (9´10˝)

Molded plastic

498 mm x 175 mm x 423 mm

Approx. 16.0 kg (35.3 lbs)

0°–45°C (32°–113°F)

20%–80% (no condensation)

NOTES ON USE

1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or

electric shock.

2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate,

due to impact or extended use.

3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions.

• Never place objects on top of the projector while it is operation.

• Make sure there is an unobstructed space of 500 mm or more around the projector's exhaust openings.

• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to

provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating

atone time and the other unit is used as a backup.

• If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 ˚C and 40 ˚C. Also make sure the

projector's intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the

intake openings.

* Even when the ambient temperature near the intake opening is 40 ˚C/104 ˚F or lower, an accumulation of hot air inside the cabinet may cause the

protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to ambient temperature

conditions.

4. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system's alternating lamp operation (lamp changer) function.

The projector cannot be operated continuously 24 hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per

day if the using the dual-lamp mode.

5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.

• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.

• The brightness of the lamp will gradually decrease with use.

Please visit our website for more information.

http://panasonic.net/avc/projector

panasonic projector global

PT-DW6300

0.7˝ diagonal (4:3 aspect ratio)

786,432 (1,024 x 768) x 1, total of 786,432 pixels

Powered zoom/focus lenses (1.8– 2.4:1), F 1.7– 2.0, f 25.6–33.8 mm

50– 600 inches (50–200 inches with the ET-DLE055),

6,500 lumens (dual lamp, high power mode)

1,280 x 800 pixels

Horizontal: 15– 91 kHz, Vertical: 50– 85 Hz, Dot clock: 150 MHz or lower

Vertical: +50% (powered), horizontal: ±10% (powered)

—

Please contact Panasonic or your dealer for a demonstration.

JQA-1617

Weights and dimensions shown are approximate. Specifications are subject to change without notice.

An application has been filed for trademark rights, or trademark rights have been granted,

for PJLink in Japan, United States of America and other countries and area.

VGA and XGA are trademarks of International Business Machines Corporation.

All other trademarks are the property of their respective trademark owners. Projection Images simulated.

DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments.

All information included here is valid as of February 2009.

PT-D6000

4:3 aspect ratio

1,024 x 768 pixels

EC98J2010

This product may be subject to export regulations.

PT-D6000series-09February10K Printed in Japan.