Panasonic PT-D7700 조정 매뉴얼 - 페이지 16
{카테고리_이름} Panasonic PT-D7700에 대한 조정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-D7700 17 페이지. Dlp-based sxga+ projector
Panasonic PT-D7700에 대해서도 마찬가지입니다: 사양 (12 페이지), 설정 및 운영 매뉴얼 (37 페이지), 사양 파일 (6 페이지), 브로셔 및 사양 (6 페이지)
페이지 인쇄
3. Color Matching Adjustment Method
One of the three patterns is selected from "3 Colors", "7 Colors" and "Measurement Mode".
* Projector Setting
The image menu should be unified with the dynamic mode on both projectors, each signal is
separately stored in the memory. Select "graphic" in the case of a PC, and "standard" in the
case of a video. The factory setting for gamma is different in different image modes, and the
brightness and hue do not match between projectors.
Turn off "AI" in "PICTURE" (DW5100/D5700).
Turn off "DYNAMIC IRIS", "DYNAMIC GAMMA" in "PICTURE"
(DW10000/D10000/DW7000/D7700).
Turn off "AUTO SIGNAL" in "OPTION".
Select 2.2 for "GAMMA" in "PICTURE".
Adjustment method for "3 Colors" or "7 Colors"
After adjusting red, then green and blue (cyan, magenta, yellow and white in the case of 7
colors) should be adjusted. Finally, the white balance is adjusted in place of the all white
pattern.
Turn off blending and eliminate the blended
area by using the lens shift, so that the two
images are placed side by side so that the
difference between the two can be perceived
easily.
Match the color of the images using a high
purity color and adding other colors. In the
case shown on the left, green and blue are
added to the left-hand projector, while reducing
red from the right-hand projector.
The key point of manual adjustment is not to
exceed the level of the other side through over
correction. When many projectors are used,
correction should be made while paying close
attention to the adjacent projectors so as to
obtain well-balanced color matching without
sacrificing color range and brightness.
- 16 -