Panasonic PT-DX100L 사양 - 페이지 4

{카테고리_이름} Panasonic PT-DX100L에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-DX100L 8 페이지. Pt-dz870 series 1-chip dlp projectors

페이지 인쇄

Easy Maintenance and

Superior Reliability

Panasonic's Original Dual Lamp System

This system eliminates the interruption if a lamp

should fail (in dual-lamp operation mode). The

Lamp Relay mode also operates the lamps alter-

nately to enable 24/7 projection.

Long Lamp Life Contributes to Low TCO

The PT-DZ870 Series projectors lower the total

cost of ownership because they have a lamp

replacement cycle of up to 4,000 hours *

Brightness (lumens)

Lamp mode

PT-DZ870

PT-DX100

PT-DW830

Dual: Normal

8,500

10,000

Dual: Eco

6,800

Single: Normal

4,250

Single: Eco

3,400

Filter-Less Dust-Resistant Optical Engine

ble Operation up to 45°C *

A new optical cooling system featuring a heat

pipe block suppresses temperature rises inside

the projector and allows stable operation up to

an ambient temperature of 45°C (113°F) *

use of this heat-pipe cooling system also

achieves quiet operation, enabling viewers to

concentrate on the presentation or on quiet

movie scenes.

The optical block, the heart of the projector, is

hermetically sealed to resist the effects of dust

and other particles in the air, which makes it

possible to remove the air ﬁlters for optics. It

also contributes to the low TCO.

Easy Lamp Replacement *

For easier maintenance, you can replace the

lamp from the rear. This makes it easy to replace

a lamp unit while the projector is still in the

mounting bracket or dual stacked.

* 4

With the

set to

L AMP POWER

ECO

* 5

lamp replacement cycle.

The operating temperature range is 0°C to 45°C (32°F to 113°F ) when used in locations from 1,400 m to 2,700 m (4,953 ft to 8,858 ft) above sea level. If

the ambient temperature exceeds 35°C ( 95°F ), the light output may be reduced to protect the projector.

* 7

The PT-DZ870 Series does not have an audio function.

operations can be performed only when connecting to a DIGITAL LINK compatible projector.

System Integration

Flexibility

DIGITAL LINK—The Single Cable Solution

100 m (328 ft) with a Single Cable

Equipped with a DIGITAL LINK terminal,

the PT-DZ870 Series projector allows transmis-

sion of HDMI, uncompressed HD digital video,

audio *

and control signals (Ethernet, RS-232C)

for up to 100 meters (328 feet) through a single

CAT5e (STP) cable or higher. This simpliﬁes

cabling and system upgrades, making it ideal for

ceiling-mounted and other permanent installa-

Lamp

tions.

replacement

cycle (hours)

for Easy Setup

3,000

Used together with the new ET-YFB100G Digital

Interface Box, or other compatible equipment *

8,000

4,000

the installation of this projector is easier than

5,000

6,000

ever, without any need for external receivers. The

input signal can also be easily switched *

4,000

8,000

control panel or remote control of the projector

to enable attractive presentations or lessons

using multimedia content.

Transmitter/switcher

Digital Interface Box

ET-YFB100G

. The

VCR

For details on other manufacturers' equipment,

visit our Projector Global Web Site:

panasonic.net/avc/projector

Art-Net *

The PT-DZ870 Series projector is compatible

with the Art-Net protocol for lighting manage-

ment. Art-Net compatibility lets you connect the

projector to the lighting console, and operate

functions such as shutter on/off, input change,

power on/off, etc., together with the light control.

Multi-Screen Support System Seamlessly

Connects Multiple Screens

The edges of adjacent screens can be blended

and their luminance controlled.

mode in dual lamp operation. 3,000 hours with the

* 8

Crestron's DigitalMedia 8G+™, Extron's X TP Systems and AMX's Enova DV X.

CAT5e (STP) cable or higher:

Video, audio*

and control

signals (up to 100 m / 328 ft)

Desktop PC

Document

Blu-ray disc

camera

player

Compatible

set to

L AMP POWER

NORMAL

* 6

The lamp filter must be replaced at the same time as the lamp.

* 10

Art-Net is a protocol for transmitting the lighting control protocol DMX512 over Ethernet.

This function corrects for slight variations in the

color reproduction range of individual projectors.

The PC software assures easy, accurate control.

The PT-DZ870 Series can project large, multi-

screen images without any additional equipment.

Up to 100 (10 × 10) units can be edge-blended

at a time.

Color matching

Edge blending

Source

PT-DZ870 Series

from

Multi-Unit Brightness Control

This function automatically corrects the bright-

ness ﬂuctuations that occur over time in the

individual projectors of a multi-screen system. Up

to eight projectors can be controlled by connect-

ing to each other via a hub, and this can be

increased to a maximum of 2,048 projectors by

using "Multi Projector Monitoring & Control Soft-

ware Ver. 2.8."

I Conventional Projector

At the time when the

projectors are installed (A)

Projector 1

Projector 2

After a certain time has

passed (B)

Projector 1

Projector 2

Brightness

fluctuations

occur.

Brightness

Image from

the projector 1

Image from the

projector 2

(A)

(B)

Time

mode in dual lamp operation. The usage environment affects the

* 9

Input selection and other ET-YFB100G

With edge blending

Without edge blending

Overlapping

image edges

I Multi-Unit Brightness

Control "ON"

At the time when the

projectors are installed (A´)

Projector 1

Projector 2

After a certain time has

passed (B´ )

Projector 1

Projector 2

Preset

brightness

Brightness

Images from the

projector 1 and 2

(A´ )

(B´ )

Time