Panasonic PT-DZ12000U - WUXGA DLP Projector 설정 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} Panasonic PT-DZ12000U - WUXGA DLP Projector에 대한 설정 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PT-DZ12000U - WUXGA DLP Projector 37 페이지. 3-chip dlp projector
Panasonic PT-DZ12000U - WUXGA DLP Projector에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지)

Panasonic PT-DZ12000U - WUXGA DLP Projector 설정 및 운영 매뉴얼

Preparation

Preparation
PC
PC
Network Setup
Set the IP address, subnet mask and gateway according to the operating environment. (Consult your network
administrator.
Turn off the proxy setting in the browser or register the IP addresses of the projectors to the proxy exceptions
list.
Projectors
Projectors
Network Setup
Set the host name (projector name), IP address, subnet mask, and gateway. (Consult your network
administrator.)
Set DHCP to OFF and set a fixed IP address, making sure that the entered IP address is not used by
any other device on the LAN.
If the entered IP address is used by another device, the projector cannot be registered.
The host name set for the projector is displayed as the projector name on the software.
Enable Web Control, Network Standby and PJLink Control.
For models in which the Web port number can be set, set the port number to "80."
Others
Disable Input Auto Search.
7